COVID Policies
We are back in person! Please see our Fall 2022 Callout Slides for information regarding how to use the lab.
Lab Location
Location: Lambertus 3329
Operating Hours: 9am to 6pm M-F
A schedule of our Supervisor shifts is located on the Support page.
3D Printing Methods
FDM Printing
FDM (PLA) printing is free for all 3DPC members. Print jobs are fulfilled on a first come, first serve basis. We are unable to guarantee any color requests, as well as accept any personal filament. For questions, please email us.
Material: PLA
Technical Sheet: Click Here
SLA Printing
SLA printing is $0.30 cents per ml of resin used. We have clear resin only. Due to the manufacturing process, there will be longer wait times. SLA print jobs can be requested by email. Any prints will need to be payed for before prints can be dropped off.
Material: FormLabs Resin
Technical Sheet: Click Here
SLS Printing
SLA printing is $0.30 cents per ml of resin used. We have clear resin only. Due to the manufacturing process, there will be longer wait times. SLA print jobs can be requested by email. Any prints will need to be payed for before prints can be dropped off.
Material: SLS Powder
Job Submission Steps
1. Visit the lab
2. Get Supervisor approval for all of your parts
3. Fill out Job Form with Supervisor (they will start your print!)
More Detailed Instructions on our Discord
Picking Up Parts
You will receive an email from a supervisor once your parts have been completed.
Completed parts will be dropped off at 3DPC’s dropbox within two days of you receiving an email. If you do not see your parts in the dropbox within two days, please contact us.
Dropbox Location: Inside the lab in Lambertus 3329
Available Printers
FlashForge Inventor II
Type: Single Extruder FDM
Material: 1.75 mm PLA
Build Volume: 140x140x150 mm
Extra: Enclosed, Touch Screen
Dremel Digilab 3D45
Type: Single Extruder FDM
Material: 1.75 mm PLA
Build Volume: 170x254x152mm
Extra: Enclosed, Heated Bed, Touch Screen
Original Prusa Mini
Type: Single Extruder FDM
Material: 1.75 mm PLA
Build Volume: 180x180x180mm
Extra: Heated Bed, Filament Sensor, Touch Screen
Original Prusa i3 Mk3s+
Type: Single Extruder FDM
Material: 1.75 mm PLA
Build Volume: 210x210x250 mm
Minimum Layer Resolution: 0.2 mm
Extra: Heated Bed
Ultimaker 2+
Type: Single Extruder FDM
Material: 2.85 mm PLA
Build Volume: 223x223x205 mm
Minimum Layer Resolution: 0.2 mm
Extra: Heated Bed
LulzBot TAZ 6
Type: Single Extruder FDM
Material: 2.85 mm PLA
Build Volume: 280x280x250 mm
Minimum Layer Resolution: 0.2 mm
Extra: Heated Bed
LulzBot TAZ Workhorse
Type: Single Extruder FDM
Material: 2.85 mm PLA
Build Volume: 250x250x285 mm
Minimum Layer Resolution: 0.2 mm
Extra: Heated Bed
Raise3D Pro2
Type: Dual Extruder FDM
Material: 1.75 mm PLA
Build Volume: 305x305x300 mm
Minimum Layer Resolution: 0.2 mm
Extra: Enclosed, Heated Bed, Touch Screen
BCN3D Sigma R19
Type: Independent Dual Extruder FDM
Material: 2.85 mm PLA
Build Volume: 210x210x297 mm
Minimum Layer Resolution: 0.2 mm
Extra: Heated Bed, Touch Screen, Independent Extruders
Formlabs Form 2 – By Request
Type: SLA
Material: Clear Resin
Build Volume: 145x145x175 mm
Minimum Layer Resolution: 0.025 mm
Peopoly Phenom L – By Request
Type: SLA
Material: Peopoly Resin
Build Volume: 346x194x400 mm
Minimum Layer Resolution: 0.05 mm
Extra: Touch Screen
Formlabs SLS Fuse 1 – By Request
Type: SLS
Material: SLS Powder
Build Volume: 165 x 165 x 300 mm
Minimum Layer Resolution: 110 microns
Extra: Touch Screen